Sewerage and water supply are the engineering systems without which it’s impossible to put any facility into operation. The efficiency and long-term operation of these systems depend not only on proper design and high-quality equipment, but also on professional installation. That’s why it’s important to use the services of trusted and reliable companies. The process of installing equipment requires special attention and consists of several stages.
Water Supply System
A water supply system is one of the necessary engineering systems at industrial facilities. To function well, the water you consume has to be of proper quality, and its pressure should be sufficient. You shouldn’t meet any interruptions in the supply. It’s also necessary for a contractor who performs the design and installation of water supply to take a responsible approach to the tasks assigned. Only a precise selection of equipment and a right choice of water supply options can guarantee that you won’t have any problems in the future.
When designing water supply systems, you have to examine everything, which includes both the technical characteristics of the object and the requirements for future operation, in particular, clear understanding of possible peak loads. This data will be the basis for the future design of drainage systems.
Then an accurate calculation of water consumption and drainage is performed. It allows you to determine the necessary parameters of the equipment. After that, each node of the systems is designed with similar calculations, which makes it possible to ensure smooth functioning of sewerage and water supply. When designing drainage systems, companies take into account the features of equipment operation, including overgrowth of pipes and natural wear of certain elements of the systems.
A modern water supply system is a complex network, the main purpose of which is to transport water from a source (reservoir, well) to the consumer. The water supply system must first of all be reliable and provide consumers with water of the appropriate amount.
Sewerage System
Sewerage is a part of water supply and sanitation systems. It serves to isolate human waste products as well as wastewater. Besides, sewerage refers to the system of channels that is used for laying cables underground. Sewerage can be external or internal, centralized or autonomous.
Installation of sewers is a serious job that only experienced professionals can do. Improper installation of sewers can lead to disruption of water supply and sanitation systems.
Installation of a sewer system includes the following steps:
- A specialist’s visit
- Taking necessary measurements and assessing the situation
- Calculation of sewer installation cost
- Setting the warranty period required for sewer installation
- Dismantling of the old sewer system (if necessary)
- Installation of a new modern sewer system in a pre-agreed time frame
Basic Requirements for Sewerage and Water Supply Systems
The entire sewer pipe system carries danger to the environment. Possible contamination of the city’s water supply systems can lead to very serious consequences. The sewer system must necessarily be equipped away from roads and buildings. Besides, it must be located at a certain distance from reservoirs and underground water sources. Pipes that provide water supply and pipes that drain must be removed from each other.
While providing Industrial Plumbing Services, companies usually take care of the following issues:
- The entire sewage system should be designed taking into account the purpose of the facility and the requirements for collecting wastewater.
- The sewage system should combine domestic, industrial and internal drains that collect rainwater and meltwater.
- It’s completely forbidden to lay sewer pipes under the ceiling, in the walls and floor of any buildings.
The choice of the scheme for water supply should be made with a comparison of many factors. You have to take into account the features of objects, all sources with potable water, the flow rate and pressure, the quality and provision of supply.
Offering Commercial Plumbing Toronto companies always pay attention to the following factors:
- The design and construction of water supply should be provided with modern solutions, complete mechanization of heavy and labor-intensive work and automation of technological processes.
- The choice of water quality for production needs should be regulated by the technological requirements of the enterprise.
- No matter for what needs (private or industrial) water supply is carried out, a security zone should be organized around all water supply systems.
