Don’t know how to fix loose pavers? It’s imperative you know- loose pavers not only are visually disastrous, but they can become hazardous for people walking by. Sometimes pavers can become loose during installation. But this isn’t the main problem. If you don’t know how to fix sunken pavers, much less how to fix gaps in pavers, it’s time you get started on some 101 Paver Maintenance before you run into a safety issue in your patio.
How to Fix Loose Pavers
If you are remodeling your backyard, you may want to know how to fix loose pavers. Let’s take a look at how to fix loose pavers and examine some potential reasons behind your pavers becoming loose out of the sudden. By the end of this article, you’ll be ready to make your patio safe again for your guests.
Why Are Your Pavers Loose?
Although it’s hard to pinpoint the reasons behind the loosening of your pavers, there are some potential culprits you should be aware of from now on. This will help you perform an optimal maintenance in the future, as you’ll know how to trace the problem back to its root.
- If you didn’t use spacers when installing your pavers to make uniform spaces, then there is too much space between them. Close-tight pavers aren’t just for looks: it’s to make the whole surface stronger and stabler.
- Did you compact the base of sand? If you didn’t, then a shifting base could have dislodged your pavers.
- If you skimped filler sand, then there’s not enough sand to keep the pavers in place.
- Pavers usually start wearing around the edges when they’re old enough. You can fix this problem with proper edging.
- Are your pavers inclined to let water flow smoothly? Are they able to let water flow easily? If they’re not, they will absorb moisture.
Fixing Loose Pavers
The only way to fix loose pavers is by adding more sand; it will strengthen the base and keep the tiles on their place for a long while. This is how you do it:
- Pull out the loose paver and spread the sand out into a flat layer. It should be smoothed down to a solid layer. This will give the paver a solid base.
- Place the paver in the designated space. Adjust the sand until they’re all on the same level.
- Gently tap the paver in place with a rubber mallet until it’s in place. Adjust sand and tap as many times as needed until the level is the one you’re looking for.
Pouring Sand and Sweeping Can Help
Although our step-by-step has taught you how to fix loose pavers, you need to keep in mind that pavers get loose after installation and maintenance works time later, so you’ll have to repeat this process now and then.
Still, it’s possible to make pavers remain in place for a longer time if you pour sand over the area and use a push broom to move it around. Continue to wet the sand and continue the process until all the spaces are filled.
Sweep, sweep, sweep, until you’re satisfied with your job.
Helpful FAQ’s
How do I fix loose edges on my pavers?
If you can’t afford the aforementioned edgings, then simply follow our guide. Just because it is an edge doesn’t mean that the whole paver can come out later on, so better to it now than to be sorry later.
How How do you prevent pavers from shifting?
You can prevent the pavers from shifting by adding a solid edge to your patio, like cement, plastic or metal edging. You can then spread polymeric Sand over the surface, and sweep it into the spaces to keep them in place.
So, how to fix loose pavers? To summarize, you just need to add more sand. You can adjust the amount of sand beneath pavers to fix loose pavers. Now that you know how to fix sunken pavers how to fix gaps in pavers, your patio is a safe place for your social gatherings once again. If you would like more information, our professionals here at San Diego Pavers can assist you with your paving needs.
