Six Stages of Cleaning | Key Steps & Safety Factors – High Speed Training

clean

We all clean at home, work, or just when we’re out and about. And let’s face it, keeping things clean is super important for our health and safety, especially in workplaces where many people come together. But do you know the best way to clean and disinfect surfaces to get rid of all those pesky germs and bacteria? Well, in this blog, we will break down the six stages of the office cleaning process to help you become a cleaning pro! So get ready to roll up your sleeves and join us on this journey to a cleaner, safer, and healthier world!

 

Mastering the Art of Disinfection: A Step-by-Step Guide to the Six Stages of Cleaning

To prevent health and safety hazards, it’s essential to follow an effective cleaning procedure. The six stages of cleaning are designed to remove microorganisms, prevent spreading them, and minimize risks. Each stage has a specific focus, from preparing the surface for cleaning to destroying microorganisms and removing any chemicals. This ensures that the surface is disinfected and ready for use.

The following six cleaning stages are:  

  1. Initial or Pre-Clean

Getting rid of loose materials and dirt from the contaminated surface you’re cleaning is the first step in cleaning. This can be accomplished by sweeping, rinsing, or wiping with a disposable towel. To prepare the space for the following cleaning stage, the goal is to eliminate as much loose debris as possible.

 

  1. Main Clean

Any chemicals, dirt, grease, and debris you could not remove during the pre-clean step should be loosened during the second cleaning stage. To do this, hot water and detergent are used. Again, you might be able to remove the loose materials as soon as possible using a suitable tool, like a cloth or mop, or you might need to wait for the disinfectant to finish its job for a specific amount of contact time before doing so.

 

  1. Rinse

Once you’ve allowed the cleaning solution to loosen any grime and dirt on the surface, it’s time to move on to the third stage of cleaning. In this step, you’ll use hot water to rinse away all the loosened substances and the cleaning detergent from the previous stage. You can use a squeegee, mop, cloth, or any other suitable cleaning tool for this purpose. Just make sure the water is clean to avoid spreading dirt and bacteria.

 

  1. Sanitisation

The fourth cleaning stage involves disinfecting the surface to eliminate bacteria and other harmful microorganisms. You can use a chemical disinfectant or heat, but following the instructions carefully for your product or equipment is essential. Ensure that the disinfectant has sufficient contact time to kill off all germs on the surface.

 

  1. Rinse Off

After disinfection, the following cleaning stage is to remove any remaining disinfectants on the surface. This can be done by using clean hot water. However, depending on the disinfectant and surface, this step may not always be necessary. It’s essential to read and follow the manufacturer’s instructions to determine whether a final rinse is required. Seeking further guidance is recommended if you’re unsure about the procedure.

 

  1. Drying

The last step of the six stages of cleaning is drying the surface. Air drying is the preferred method, but you may use a drying cloth if necessary. In a commercial setting, drying cloths should be single-use to prevent contamination. It’s important to note that damp cloths should never be air-dried and reused, as bacteria can grow and spread. After this final stage, the surface should be thoroughly cleaned and free of most microorganisms, depending on the cleaning agents used. Remember to follow the instructions on the products you use and seek additional guidance to ensure the surface is properly disinfected and safe for use.

 

The six cleaning stages ensure that surfaces are thoroughly cleaned and disinfected, minimising the risk of remaining harmful microorganisms. By following these stages of office cleaning, you can be confident that you have removed any dirt, debris, and detergent, destroyed any remaining bacteria, and left the surface clean and safe to use. Each stage plays an important role in the overall effectiveness of the cleaning process, from preparing the surface for cleaning to drying it thoroughly. By implementing these six cleaning stages, you can maintain a healthy and safe environment for yourself and those around you.

 

This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *