Is your car window squeaking when rolling it up? How about the glass being ‘sticky’ and too slow to move? If you’re facing these issues, you only need to perform a few steps to restore the smooth function of your car windows. The following are the easy solutions you can do at home:
(*5*)5 steps to fix slow or squeaky car windows
Step 1. Apply a lubricant
The first thing you should do to fix a squeaky car window is applying a moly lubricant. Apply the lubricant to the seal inside the window frame. This will help dislodge any dirt that causes the squeaky noise or slow movement of the auto glass.
Be sure to spray the lubricant onto the window frame. This will allow any excess to fall down into the window frame. Don’t worry about the mess since you can wipe it later on.
Step 2. Repeat it on the other side of the windows
Next, you need to apply the lubricant to the other side of your car windows. You should apply the lubricant evenly along the vertical frame, from the bottom to the corner seal.
If there is an excess lubricant, wipe it using a clean microfiber towel. This step should be repeated on all affected windows.
Step 3. Let the lubricant sit for a few minutes
Once you’re done applying the lubricant, let the solution sit for a few minutes. This will allow the solution to penetrate the window seal.
After that, roll your window up and down a few times. This will allow the lubricant to be spread even further and also remove any accumulated debris. The auto glass should go up and down fully without any bumps or squeaks.
Step 4. Re-apply the lubricant
If your car window still produces noises, you can re-apply the lubricant. You can do this while the glass is still rolled up. This will ensure that the lubricant is evenly distributed inside the car doors, where it might be leaking. You should apply the lubricant generously to penetrate the window seal.
Step 5. Clean up
Lastly, repeat all the steps above as necessary. Always keep a clean towel handy, so you can prevent the excess lubricant from causing streaks on your car paint.
Once you’re satisfied with the results, wipe the rubber seal of the car window after a few hours. Also, you should remove any remaining lubricant which could attract dirt. Then, use a glass cleaner and a towel to clean your car’s windows.
However, if the squeaky noise from your window isn’t going away after lubrication, it’s best to visit an auto glass shop. There might be a problem within the window mechanism that requires repairs.
(*5*)Conclusion
Squeaky windows are annoying. The good news is that there are easy steps for a quick fix, which you can perform at home. Still, you should bring your car to an auto shop periodically for a professional inspection. If the squeaks keep coming back, an auto glass technician may be able to provide permanent solutions.
