Do you have a pair of rubber boots you use for work, gardening, fishing or hunting? While relatively sturdy, they can sometimes become split or damaged, so it’s useful to know how to repair to repair rubber boots, before it happens.
Just like any other footwear investment, rubber boots need looking after if you want them to look after your feet. Let’s be honest, some of these boots can be extremely costly, but they could last you years.
Let’s discover how to fix damaged rubber boots, and also how to look after them.
How to Fix a Crack or Split in Your Rubber Boots
Over time, wear and tear can cause cracks or splits in rubber boots. You should pay attention to the ankle area, as this is where you’re most likely to bend and flex during the day.
A split in your boot could also be caused by damage from something sharp. Maybe your aim with a pitchfork wasn’t as good as you thought and you punctured your boot.
It is easy to repair a broken or punctured boot. You don’t need lots of fancy equipment to carry out a functional repair.
What You Need
- Warm soapy water.
- Use a dry cloth.
- Painter’s tape.
- Sandpaper
- Urethane glue.
- Use a wooden stick or a brush.
- Rubber Gloves
Urethane glue is both waterproof and flexible, making it a good choice for repairing rubber. It sticks well and seals any cracks or gaps. There are several on the market you can choose from, some of the better ones we have found include:
- Gear Aid Aquaseal: This is available in two different types: Aquaseal and Freesole. Both are flexible and can bond well to rubber boots.
- Shoo Goo Repair Adhesive: This sealant glue can be used on any part of your rubber boots and has good waterproofing properties.
See Our Related Post: Best Glue For Shoes For Leather, Rubber and Soles
The Method
- Using soapy water, thoroughly clean the outside of the boots.
- Use a towel to dry the boots.
- Take the painter’s tape and mark out the area to be repaired by taping about two inches away from it on all sides. This leaves the hole or cracks exposed in the middle of the tape and seals off the rest of the boot from the area to be glued.
- Using sandpaper, lightly sand the area to be glued. This will roughen the glue and improve its adhesion.
- Rubber gloves are recommended as glues can contain harmful chemicals.
- Use the glue to fill the crack or crevice.
- Use your stick or brush to spread the glue, extending it at least an inch on either side. This will ensure a tight seal and prevent cracking.
- Remove the tape and allow the boot to dry for 24 hours.
Pro Tips
Put a sponge or some paper on the inside of the boot being glued, to stop excess glue dripping through. This will protect the boot’s inner lining.
After the glue is set, you can remove the tape. If you leave it, the edge of the seal might be broken when it’s removed.
Use something heavy, like a can of beans, and roll it over the glue to push out any air bubbles and flatten it. This should be done once the glue has dried.
Make sure you glue your boots in a well-ventilated area — outdoors if possible.
Repairs on the Go
Sometimes accidents happen and you might puncture a hole in your rubber boots when you’re out working or away from home. Carrying some adhesive patches around with you will allow a quick repair to keep your feet dry. This is especially useful if you’re working in a remote area.
This repair can be done with patches made for inner tubes of bicycles. Try a pack like these from Monkey Grip, which come with rubber cement and three different sized patches. These patches will allow for natural movement and flexibility.
The Method
- Clean and dry the area to be repaired.
- Apply rubber cement to the area.
- Place the patch on top.
- Push it down firmly, right to the edges.
- Rub over the top of the patch, making sure it’s sealed.
- Leave the patch to dry for about five minutes.
Pro Tips
Extend the glue beyond the edges of the crack or puncture to prevent further cracking and get a good seal.
As soon as possible, repair any damage. Your rubber boots’ lining may be damaged if there is moisture on them.
RealTree Outdoors demonstrates how to make an immediate repair.
Repairing a Separated Sole
Although this isn’t a frequent occurrence, the sole of your boot can separate from the upper. It doesn’t mean that your rubber boots are going to be ruined.
You could use the same urethane glue you use to repair a crack or puncture, but there are also adhesives dedicated to this specific task. The advantage they have is that they dry quickly and do not need to be clamped while they do their job.
An adhesive such as Boot-Fix Shoe Glue bonds almost instantly, and will withstand further wear and tear. It will be a waterproof repair that is thin and flexible, and will stand up to all weather conditions.
The Method
- Wash and clean your boot to remove any dirt.
- Make sure it’s completely dry.
- Use your glue to fill the space between the sole of the foot and the upper.
- The glue’s drying time should be checked. If it isn’t instant, use a C-clamp to hold the upper and sole firmly together, and leave it for the recommended time.
Pro Tip
Just as you would do for a crack repair, sand the area to be glued first. This will improve the adhesive bond.
Professional Repairs
There may be times when a crack or puncture is beyond what you feel capable of repairing. If you’re unsure about what you should do, a boot and shoe repair shop can do the job for you.
Although generally a more expensive option, it’s unlikely to cost as much as a new pair of boots.
Caring for Your Rubber Boots
After a long day wearing your rubber boots, whether for work or leisure, the last thing you might feel like doing is cleaning them. But it’s important that you remove the debris left by the day’s activities, to prevent them from cracking and wearing out before their time.
Rinsing them out in the nearest puddle or under the outdoor hose might not be enough to remove the mud, dirt, and grime. A floor-mounted boot brush, such as this one from Mr. Boot Cleaner, will help remove mud and dirt from the soles and uppers.
Following this, use dish soap or other liquid soap to remove remaining dirt. Use a scrub brush to give your boots a thorough clean. Use an old toothbrush to remove any stones or grit stuck in the soles.
Leave it to stand for a few minutes, then wash it off with fresh water. Be careful to keep the inside of your boots dry, unless you have time to let them dry out naturally before needing them again.
Don’t leave them in direct sunlight to dry, though, as this can cause the rubber to deteriorate.
Consider using a product like Grangers Rubber Boot Care, to condition and restore your boots. This spray will ensure your rubber boots are in great condition.
Looking After the Inside of Your Rubber Boots
The final thing to think about is the inside of your boots. While they keep your feet warm and dry, rubber boots don’t give them much chance to breathe. This can lead to sweaty feet and an odor build-up in your boots.
You can also sprinkle baking soda on your boots and let it sit overnight. You can shake it up in the morning to absorb any bad smells. Alternatively, you can use something like Grangers Odor Eliminator to neutralize odors.
To stop moisture from damaging your rubber boots’ interior, you can stuff them with absorbent papers or use a moisture-absorbing pouch. Some like these Rejuvenair ones will absorb moisture and odor, or you can use silica gel sachets for moisture alone.
Wrapping It Up
There are times when your rubber boots just cannot be saved and end up relegated to the backyard as planters. They might have cracks or tread that is worn out and no longer be safe.
However, there are plenty of things you can do while your boots aren’t past the point of no repair. You can get years out of your rubber boots by using adhesives.
If you found our guide on how to repair rubber boots useful and enjoyable, please leave us a comment. We would love to hear your experiences and any tips you might have. Also, don’t forget to share, so others can extend the life of their rubber boots.
