Introduction
First of all, flameless candles are a type of candle that can be used without being attached to any fuel source, which means they are a lot safer. Because they have an integrated lighting system, you don’t need matches or lighters. However, these are ideal options for fishers and campers at night as you will reach your place late at night and what if you don’t have enough time to light up a candle with traditional methods? The best choice would be to use flameless candles instead. Today I will discuss how to fix flameless candle to patch things up when you are in a fix easily.
Step-wise Guide on How to Fix Flameless Candle
- At first, you have to unplug the unit from the power outlet and then remove its plate in front of the battery compartment.
- Unscrew the screws on tape, carefully insert the knife into holes, and turn it in a clockwise direction to remove the battery.
- Connect the red and black wires by cutting off 2 cm. Put their ends into metal housings (which are provided) at the bottom side of the candle along with green wire without soldering it to the place holder. Before inserting them into their housings, make sure they are connected to a plate made of metal.
- Now you have to disconnect a blub in front of the battery compartment. Next, place your circuit board that you have attached above it and connect one end with another wire (green).
- You have to strip the remaining red and black wires of length 2-3 cm and then make conduction with green wire. Connect their ends to batteries along with a metal plate which you have fixed at the bottom of the candle, and then wrap it all around the candle by using wrap tape or by encapsulating it.
- Two LEDs should be attached to the left side of your battery compartment, where you have a bulb. It will turn on when the power is on. This step is totally optional because this LED doesn’t glow much. This step can be skipped.
- Once you have completed the above steps, place your flameless candle in its cover. Next, screw all the screws into the plate to fix it properly.
- Now the last step is to test whether LED’s are glowing or not when we plug our device into the mains power supply, i.e., if there is a light or not while switching on the device; you have to unplug it from the place and re-plug it again for proper working. (Even if there were no light at this time, even then, don’t worry, repeat the above-mentioned steps once again).
Precautions While Fixing Flameless Candles:
- If you’ll be fixing a window candle, choose the window with ample sunlight so that it may keep working throughout the day. If you use colored glass windows, it could look just like a real candle.
- Always remember to turn off the lights before taking out the batteries from your previous flameless candles and after inserting new ones into your brand‐new ones! This will certainly avoid draining all of the power accidentally plus keep them working for years to come. In addition, Flameless LED Candles are both safe and energy-efficient as they do not need any replacement parts or bulbs!
- Do not bring these types of flowers near water sources or high moisture areas such as showers or bathrooms because they often emit water vapor which could cause the inner electronic elements short circuit.
- Don’t bury them in snow as these kinds of candles are not designed for usage in freezing conditions. If your candle stops working or blinks, this is likely due to low batteries. Please refer to the section on Replacing The Batteries below.
- Please avoid any flame-producing devices such as lighters, cigarettes, and matches when you use artificial flowers.
- Before placing a flameless flower arrangement near an air conditioner, make sure that they aren’t turned on since you might inadvertently damage your creations. Also, make sure you don’t knock over your candle display, or put anything in it such as vases or decorations. This could cause damage to your batteries and candles.
Benefits of Using Flameless Candle:
Flameless candles are the best solution to add some flattering effects of light and warmth, largely without any fire exposure. Faux candles have the same feel and appearance as real ones, with their ability to flicker like real flames. You can choose from four different colors for the flameless candle. If you need more lumens you can opt for LED solar flush-mount lights.
First-rate Quality, Decorative Design Options:
There are so many types of faux wax candles for weddings that it’s really refreshing! They will add elegance to the home or wedding venue. These colored pillars of tapers, flickering LED candles, and many other different candle styles can be used to decorate both indoor and outdoor places.
These candles can be directly glued to the wall or the tabletop or, better yet, securely attached with a ribbon. This creative method is great for adding lighting to your table decorations, such as weddings, babyshowers, and other events that require candles.
During the Christmas holidays, it’s common to see flickering candles at every home window. There are also flameless LED lights that can be used in churches or as garden lights.
Flameless wax pillar candles come in different sizes, from 3 inches tall to 6 inches tall (7-8 inches look great for centerpieces). They are really affordable, and you’ll have no problem finding them online and in retail stores near you. You can even select the right color and brightness to suit your taste.
FAQ:
Q: What are the common problems of flameless candles?
A: Some common problems are no visible light, low brightness, flickering, or no response to remote control or timer.
Q: How can I fix a flameless candle with no visible light?
A: You can try to replace the battery, check the electrical connection, or inspect the candle for any damage.
Q: How can I fix a flameless candle that has low brightness?
A: You can try to replace the light bulb, tighten the socket, or check the cord for any breaks or fraying.
Q: How can I fix a flameless candle that is flickering?
A: You can try to charge or replace the battery, adjust the remote control distance, or use a compatible remote control model.
Q: How can I fix a flameless candle that does not respond to the remote control or timer?
A: You can try replacing the batteries in both devices, moving the remote closer to or farther away from the candle, or using a timer function.
Conclusion
I hope this article has provided you with adequate information on how to fix flameless candle. Also, make sure you’re safe while doing the job. We are grateful and wish you a pleasant day.
